MEP Products

Cable Trays & Accessories

Cable trays provide significant advantages in cable filling over other wiring methods, resulting in savings in the size or number of raceways required and reducing both material and labor costs

Material Thickness
1.0 mm | 1.20 mm 11.50 mm | 2.00 mm

Side Heights:
50mm, 75mm, 100mm

Available Widths:
50, 100, 150, 200, 225, 300, 400, 450, 500, 600, 700, 800, 900, 1000 mm

Fittings: Bend 45 Bend 90". Intersection. Outside Riser Bend 45". Inside Riser Bend 45, Outside Riser Bend 90°. Inside Riser Bend 90°, Tee Branch, Reducer

Cable Trunkings

Cable Trunkings are used to protect cables from damage and dust and are square in shape. Our cable trunkings system comes in a variety of thickness and sizes and is available in three types: Single, double, and triple compartments.

Available Thicknesses: 1 mm-1.2 mm-1.5 mm
Lengths: 2400 and 3000 mm

Fittings: Bend 45° Top Lid, Bend 45" Inside Lid, Bend 45 Outside Lid, Bend 90° Top Lid, Bend 90 Inside Lid, Bend 90° Outside Lid, TEE Bend Top Lid. TEE Bend Inside Lid, TEE Bend Outside Lid, Intersection, Reducers.

Cable Ladders

Rung Types (Swaged And Channel)

Material Thickness
1.50 mm, 2.00 mm, 2.50 mm

Swaged Type (Aluminum & Steel)
- Rounded tubular with 25 mm diameter
-Rung standard spacing 229 mm

Channel Type (Steel)
- Plain or slotted, and can be mounted upwards or downwards.
- Rung standard spacing 229 mm

Channel System

Size: 41x41 & 41x21
Thickness: 1.2,1.5,2.0& 2.5 mm
Applications:
- Metal Framing / Electrical Applications
- Pipe & Conduit Supports
- Tunnel Pipe Stanchions
- Beam Attachments
- Pipe Risers
Channel
Cable management support channel is cold formed on modern rolling machines from low carbon steel manufactured.
Lengths
- Standard length: 3000mm with ± 3.2mm length tolerance.
- Custom lengths are available upon request.
Finishes
Standard Finishes: Pre-Galvanized finish (ASTM A653M coating G90band G60). Hot Dip Galvanized after fabrication (ASTM A123 or BSEN ISO1461:2009). Other custom coatings are available upon request.

Cantilver Arm

Support Systems are well designed to provide necessary support for cable trays, cable ladders and trunkings. Cable supports are manufactured according to common standards from high quality raw materials.

Finishes: Pre-galvanized steel - Hot Dip Galvanized Steel - Stainless Steel

Thicknesses: 1.5, 2.0, 2.5 mm

Applications:
- Metal Framing / Electrical Applications
- Pipe & Conduit Supports
- Tunnel Pipe Stanchions
- Beam Attachments
- Pipe Risers

Fasteners

A range of Nuts, washers, bolts and anchors of variable sizes, lengths and finishes with Low energy impact and power-saving assembly.

Material:
- Zinc Plated Steel.
- hot dip galvanizing
- Stainless Steel [ SS 304 (A2), SS 316 (A4) ].